Rislone says its Fuel Injector Cleaner with Fuel Conditioner & Treatment helps eliminate noisy injectors and fuel pumps, rough idle, hard starting and hesitation, while increasing vehicle power, performance and mileage. According to the company, the product contains a blend of additives that clean and lubricate the entire fuel system — including fuel tanks, lines and injectors — and with continued use reduces carbon buildup that can cause preignition, power loss, burned valves and broken rings.
A key ingredient is the Rislone Upper Cylinder Lubricant, which the company says lubricates the entire fuel system, starting in the fuel tank and fuel lines, where it helps prevent rust and corrosion; it also lubricates and protects the fuel pump for longer life and quieter operation. Rislone says the next step for UCL is to lubricate the injectors, allowing them to work more efficiently; not only are cylinder deposits, including gum and varnish, removed, but as the UCL treats the upper cylinder, a lubricating film is formed that helps prevent carbon from sticking so that it can be burned off. This film lubricates the upper piston, rings, guides, valves and seats, according to the company, and continued use of the cleaner in every tank of fuel offers full-time lubrication, reducing friction, wear and excess heat, while replacing the lost additives in ultra-low-sulfur diesel.
Rislone Fuel Injector Cleaner is available in several sizes, including a single-use 6-ounce bottle, 32-ounce bottle, 5-gallon pail and 55-gallon drum. Rislone says the cleaner complies with federal low-sulfur content requirements for use in diesel motor vehicles and nonroad engines. For more information, go to www.rislone.com.