Twin steer option now available on Kenworth T880S

user-gravatar
Updated Oct 26, 2018
45474447752_769d783dea_z-2018-10-25-06-03

Kenworth is making available a factory installed twin steer configuration to its T880S vocational model, featuring a set-forward front axle with a 61-inch axle spread to maximize payload.

The Kenworth T880S Twin Steer offers a short 114-inch BBC, allowing larger bodies to be installed farther forward and closer to the cab. The front axles are rated at 40,000 pounds. The front end components, including axles, springs, and steering gears are shared with non-twin steer T880S. The front suspension is equalized between the front and rear steer axles for greater driver comfort and payload distribution between the two.

For customers in the U.S., Kenworth Marketing Director Kurt Swihart says the T880S Twin Steer will address applications, such as ready mix, block trucks, cranes, and concrete pumpers. Depending on the detailed specs, as well as federal and state bridge laws, the T880S Twin Steer can handle 1,500 or more pounds of additional payload as compared to a non set-back axle twin steer.

The 61-inch axle spread enables customers in the provinces of Alberta and British Columbia to get a factory built T880S Twin Steer that meets Western Canadian tandem axle requirements, specifically for ready-mix application. It also means that the Kenworth T880S chassis can be upfitted much faster, saving between three and six weeks in delivery times to the body builder versus alternative options.

“We strive to enhance productivity for our customers whenever we can. Kenworth has a long history of building factory twin steers, including the 72-inch axle spread available on our set-back axle T800 and C500 models,” Swihart adds.

The T880S offers the MX-11 and MX-13 engines up to 510-hp with torque up to 1,850 lb-ft. An Allison automatic transmission is available when ordered with Paccar wide or standard track front axles.