More on Kenworth’s fuel cell T680: battery weight, maintenance, extending range

Quimby Mug Bayou Florida Headshot
Updated Jan 22, 2018
38818494434_b3fd04acf9_o

Kenworth recently made headlines at the Consumer Electronics Show in Las Vegas by bringing along its zero-emission, hydrogen fuel cell T680.

The high tech day cab, which was part of the PACCAR Innovations booth, gave thousands of visitors a chance to not only see the latest in hydrogen fuel cell tech, but also to learn more about Kenworth’s trial runs in the Seattle area and its plans for real-world testing with Total Transportation Services at the ports of Los Angeles and Long Beach.

Hydrogen fuel cell technology continues to attract the attention of those interested in alt fuels primarily for four reasons: it offers zero emissions, lower fuel costs, hydrogen is a renewable fuel and, unlike all-electric vehicles, it only take minutes–not hours–to refuel a fuel cell. Those concerned with the effects of methane on the ozone layer (methane, according to the California Air Resources Board, presents a much greater threat than carbon dioxide), can breathe easy knowing that methane at dairy farms and landfills can be rendered into renewable natural gas, which in turn, can be processed into hydrogen. Yes, cow poop can fuel a Kenworth.

Kenworth reports that the fuel cell T680 has been performing very well in trial tests. It has a current range of 150 miles and a top speed of 65mph. It can carry the legal gross combination weight of a Class 8 vehicle.

“Our testing shows that this truck performs equally as well, if not better than, current diesel trucks on the market,” said Stephan Olsen, Kenworth director of product planning.

 Hard Working Trucks caught up with Olsen recently to learn more.

HWT: How much weight in batteries?

Olsen: Batteries themselves are 2,000 pounds, but with battery management, high voltage cable, coolant lines, enclosure, mounting, etc., we’re up to about 2,800 pounds.

HWT: Can the 150-mile range be increased? If so, how?

Olsen: It is very simple to increase the range: merely use a larger set of hydrogen tanks. Similar to diesel trucks, we expect that we’ll need to provide several sizes of tank capacity to match customers’ route profiles.

Partner Insights
Information to advance your business from industry suppliers
The new Volvo Trucks configurator
Presented by Volvo Trucks North America
Maximizing Fleet Cost-Effectiveness
Presented by Michelin Connected Fleet

HWT: What’s maintenance been like thus far compared to a conventional T680?

Olsen: Maintenance needs on this type of vehicle will be quite small: replace an air filter element annually, drain & refill coolant every other year, change oil in transmission in 5 years, that kind of thing.

HWT: When can interested parties test drive, lease and/or buy the truck?

Olsen: This is just a proof of concept vehicle at this time. The development cycle for this technology will take 3 to 4 years to complete.

Hard Working Trucks will keep up with Kenworth’s fuel cell T680 following its transition to the ports of Los Angeles and Long Beach where it will be put to work as a drayage truck.